Harvey Gyro Dust Woodwork Wood Filter Extractor G-700



SKU:HV-G700-DE HV-G700-DE-549
MSRP: $6,499.00
Was: $5,899.00
Now: $5,599.00
(You save $900.00 )
Calculated at Checkout
28 Jun 2024
Adding to cart… The item has been added


Model:Harvey Gyro G700 Woodwork Dust Extractor

Description :Gyro Air Dust Processor

Why is Gyro Air better? Because it uses a unique and patented technology which Harvey Industries developed called Axial Centrifugal to separate the dust particles from the air flow. This system takes the air and dust from the impeller into a series of turbine vanes which results in the dust spinning at 4,000 RPM and forcing the dust particles to the outer edges of the air flow where they drop into internal bins. Only 0.1% of the air flow gets to the pleated filters at the end of the system resulting in less clogging and that means that the system maintains its efficiency and performance levels for much longer than standard DC systems.

In standard systems, the filters do most of the work to separate the dust from the air. In cyclone systems, the large chips are generally collected first but then large amounts of the dust particles still travel to the filter. In both cases the filters must become heavily coated to operate correctly but in doing so, they lose their efficiency resulting in less air flow and lower static pressure. Frequent cleaning is needed to keep them working at high levels. Gyro Air physically separates the dust from the air before sending the exhaust air with minimal dust particles to the filter.

And now the G700 comes with the benefit of HEPA grade filters . These filters are rated at MERV 17 and capture particles down to 0.3 microns.

Less dust in the air means higher air quality levels and fewer respiratory issues for workers in the area.


  • 99.7% dust separation before filtration
  • Up to 50% energy saving (only 1.5 Kq)
  • Filter emission rating 0.05mg/m³
  • Strong and stable static pressure
  • Compact size with built-in mobility kit
  • Strong and constant static pressure
  • HEPA filter 0.3 micron (Merv 17)
  • Industrial motor and VFD speed control
  • Intelligent dust-full monitor
  • Remote control
  • Power coated steel frame
  • Steel dust separation system
  • Convenient tool-less dust tank cleaning
  • 1-2 Dust port adaptor
  • RED-DOT industrial design award winner


Power Requirement 220V, Single Phase, 50 HZ
Inverter Type MD200
Type TEFC Induction
Power 1.5 Kw
Rated Amps 5.8A
Speed 2280 - 4275 rmp Variable
Recommended Min. Breaker Size 20 A
Product Dimensions
Overall Dimension 1430 x 579 x 858 mm
Package Size 1500 x 725 x 1072 mm
Product Weight
Net Weight 195 kg
Gross Weight 222 kg
Max. Air Flow 1885 m³/h
Max. Static Pressure 4600 Pa
Max. Air Flow @φ100mm (4") hose 1190 m³/h
Static Pressure @φ100mm (4") hose 1400 Pa
Impeller Size 300 mm
Main Inlet Size 150 mm
Adapter Inlet Size 100 mm x 2
Filter Emission Rating 0.05mg/m³
Filter Surface Area 7 m2
Noise Rating @3m 61-72 dB(A)
Max. Dust Bin Capacity 120 L
Manual Filter Cleaning Yes
Intelligent Dust-Full Monitoring System Yes
Pressure Gauge Yes



Videos Hide Videos Show Videos

Videos Hide Videos Show Videos

Shop the Best Tools and Equipment

Back to Top